-This outrunner motor is mainly designed for Blade 130X or similar size heli, running with 7.4V Lipo batteries.
-We recommend to use 11T pinion gear.
| Motor Kv: | 8000 RPM / Volt (KV) |
| No-Load Current (Io): | 0.9 Amps @ 7.4V |
| Max Continuous Current: | 7.5 Amps |
| Weight: | 7.2 grams |
| Diameter: | 16 mm |
| Length: | 17.5 mm |
| Shaft Diameter: | 1.5 mm |
| Shaft Length:: | 8 mm |
| Distance Between Holes | 8.5mm , M1.4 screw |
| Max Lipo Cell: | 2 Cell (7.4V) |
** For maximum life, please ensure that the bearings are maintained properly; put a small drop of bearing oil on each bearing every 5 flights. And please make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding and causing over load to the motor.
